Grinding Wheel Speed Calculator - Metric Units CALCULATING MPS: Enter in Millimeters (mm) for wheel diameter, Meters per second (MPS) for surface speed. The performance of grinding wheels and quality of the finished work piece is affected by how fast the abrasive grains move over the work piece. That speed affects surface quality, work piece burn, material removal rates, and other factors. Since the speed of the abrasives on the wheel perimeter depends upon the diameter of the wheel, RPM isn't a useful measure. One of the three boxes must be blank. Wheel diameter is measured in inches for Standard Units and in mm for Metric MPS =    Wheel RPM =    Wheel Diameter =      Grinding Wheel Speed Calculator - Standard Units CALCULATING Surface Feet per Minute (SFPM): Enter in Inch for wheel diameter. The performance of grinding wheels and quality of the finished work piece is affected by how fast the abrasive grains move over the work piece. That speed affects surface quality, work piece burn, material removal rates, and other factors. Since the speed of the abrasives on the wheel perimeter depends upon the diameter of the wheel, RPM isn't a useful measure. One of the three boxes must be blank. Wheel diameter is measured in inches for Standard Units and in mm for Metric SFPM =    Wheel RPM =    Wheel Diameter =      Grinding Wheel Dresser Overlap Calculator Contact Width of Dresser =  (mm or  inch)     Wheel RPM =    Traverse Speed =  (mm/min or inch/min)    Overlap =	Case Studies Wheels Quills Dressing Tools and Spindles Governing Factors Grinding Wheel Calculations [ Extended Search ]
You are here: / Products / Grinding Wheel Calculations		Last Update: 03-03-2010
© 2010 by Meister Abrasives. All rights reserved.		Privacy Statement