Meister Grinding Technologies - Grinding Wheel Calculations

	Meister Grinding Technologies Corp. - USA 201 Circuit Drive North Kingstown, RI 02852 Fon: +1 401-294-2530 Toll- Free: 1-888-Meister Fax: +1 401-294-7326

Adress:	http://www.meister-abrasives-usa.com/products/calculators
Print Date:	10-09-2010
Last Update:	12-04-2010
Description:

Grinding Wheel Speed Calculator - Metric Units CALCULATING MPS: Enter in Millimeters (mm) for wheel diameter, Meters per second (MPS) for surface speed. The performance of grinding wheels and quality of the finished work piece is affected by how fast the abrasive grains move over the work piece. That speed affects surface quality, work piece burn, material removal rates, and other factors. Since the speed of the abrasives on the wheel perimeter depends upon the diameter of the wheel, RPM isn't a useful measure. One of the three boxes must be blank. Wheel diameter is measured in inches for Standard Units and in mm for Metric

Grinding Wheel Speed Calculator - Standard Units CALCULATING Surface Feet per Minute (SFPM): Enter in Inch for wheel diameter. The performance of grinding wheels and quality of the finished work piece is affected by how fast the abrasive grains move over the work piece. That speed affects surface quality, work piece burn, material removal rates, and other factors. Since the speed of the abrasives on the wheel perimeter depends upon the diameter of the wheel, RPM isn't a useful measure. One of the three boxes must be blank. Wheel diameter is measured in inches for Standard Units and in mm for Metric

Grinding Wheel Dresser Overlap Calculator